Our Product

Easy process: The process of Sand blasting is quite easy. You do require to a hire a professional since you don’t know the precautions to be taken. Less machinery: This process just requires a compressor, a blasting pot and a nozzle. You can select the desired mixture as per the instruments used for cleaning. Wide applications: There are lots of applications of sand blasting in every area. Whatever be the type of industry you own, you require the help of this process to get rid of the unwanted deposits. Perfect cleaning: This process can be used for every material for the purpose of cleaning. Sand blasting can even be used for delicate materials, but you have to have proper knowledge of the type of materials to be used in the blast pot.

Grit-Blasting is a crucial process used not only to remove rust, but to prepare surfaces for high performance coatings, high resistance (temperature) coatings etc. Surface preparation prior to painting, bonding or other coating operations | Removal of rust, scale, sand, or paint from fabricated components | Roughening of industrial gas turbine engine component surfaces in preparation for thermal spray coating | Removal of burrs or edge profiling machined components |Surface texturing of tooling, and molds to alter the appearance of surface.

Corrosion resistant coatings protect metal components against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals. Anti-corrosion coating allows for added protection of metal surfaces and act as a barrier to inhibit the contact between chemical compounds or corrosive materials. Many of the coatings listed below also provide a bonus of abrasion resistance, non-stick performance and chemical protection.

Underwater & Wet Surface Epoxy Coatings is designed to provide corrosion protection for metal and concrete structures in offshore marine and petrochemical services, sheet piles, underground and submarine pipes, waste water tanks, jetty piles, underground tanks and other structural steel that requires protection against corrosion in aggressive environment. It is most suitable for rehabilitation of corroded steel and concrete structures in tidal zone and below water line where conventional protective coatings are not applicable. It is an ideal maintenance coating for cold pipes with condensation.

Anti-corrosion coatings comprises of zinc rich primers, high build epoxy coating, polyurethane, acrylic and etc. has been widely used for protection of onshore and offshore structures. The coating system is designed suitable for jetty, bridges, tanks, petrochemical plants, pipes and etc.
Coatings with anti-corrosive properties ensure metal components have the longest possible lifespan. Because metal components run in harsh applications, Metal Coatings provides the most widely used coatings in the industry

Easy process: The process of Pipeline blasting is quite easy. You do require to a hire a professional since you don’t know the precautions to be taken. Less machinery: This process just requires a compressor, a blasting pot and a nozzle. You can select the desired mixture as per the instruments used for cleaning. Wide applications: There are lots of applications of Pipeline blasting in every area. Whatever be the type of industry you own, you require the help of this process to get rid of the unwanted deposits. Perfect cleaning: This process can be used for every material for the purpose of cleaning. Pipeline blasting can even be used for delicate materials, but you have to have proper knowledge of the type of materials to be used in the blast pot.

Faster than chemical cleaning, our turbo-blast cleaning capabilities ensure thorough cleaning of above- and below-ground piping with industry-leading systems and processes designed to protect operators, pipes and the environment while delivering unmatched performance at cost-effective prices. At Copag., our turbo-blast cleaning is accomplished by using a gaseous medium to blast hard particles through a pipeline to remove oxides and deposits from interior surfaces of the piping. When finished, the interior surface is often smoother than original new pipe. And although calculations, preparation and set-up can take time, the cleaning time is short, which means minimal down time for the pipelines themselves.It’s a faster process than acid treatment, which often leaves unclean areas and requires neutralizing, disposal and drying.Sandblaster is commonly used as a supporting tool for other bigger Pipeline blasting equipments to clean the inner wall of pipeline, and it could be operated manually or automatically.

Surface preparation is the essential first stage treatment of a steel substrate before the application of any coating, and is generally accepted as being the most important factor affecting the total success of a corrosion protection system. The performance of a coating is significantly influenced by its ability to adhere properly to the substrate material. Residual millscale on steel surfaces is an unsatisfactory base to apply modern, high performance protective coatings and is therefore removed by abrasive blast cleaning. Other surface contaminants on the rolled steel surface, such as oil and grease are also undesirable and must be removed before the blast cleaning process. The surface preparation process not only cleans the steel, but also introduces a suitable profile to receive the protective coating.

Structural steel elements in new structures are usually either hot rolled sections or fabricated plate girders. The initial steel surfaces normally comply with rust grades A or B according to BS EN ISO 8501-1[1]. Material that is pitted, i.e. rust grades C or D, should be avoided if possible, since it is difficult to clean all the corrosion products from the pits during surface preparation. Descriptions of rust grades A to D are as follows A - Steel surface largely covered with adhering mill scale, but little if any rust B - Steel surface which has begun to rust and from which mill scale has begun to flake C - Steel surface on which the mill scale has rusted away or from which it can be scraped, but with slight pitting under normal vision D - Steel surface on which the mill scale has rusted away and on which general pitting is visible under normal vision

Various methods and grades of cleanliness are presented in BS EN ISO 8501-1. This standard essentially refers to the surface appearance of the steel after hand cleaning, power tool cleaning, abrasive blast cleaning or flame cleaning and gives descriptions with pictorial references of the grades of cleanliness.

Just as surface cleanliness before first coating is fundamental to performance of the system, so is the cleanliness of painted surfaces prior to the application of subsequent coats. On site, thorough cleaning shortly before painting is always necessary to remove contamination accumulated over time and from construction activities including dust, grout leaks from concreting, and the products of blast cleaning, bolting and welding.

When you have a project that requires blast cleaning and coating, let our professionals handle it. We specialize in commercial painting, blasting and coating, delivering you with unparalleled services that exceed your expectations. Our goal is to deliver the highest quality of services, establishing lasting relationships and handling just about any job you need.

We cover a broad range of commercial painting and blasting services, including working on fleet vehicles, bed liners, and the exterior of many buildings. Whether a new coating, a new color, or refinishing, you know you’re choosing a painting professional with a vast level of experience from Copag Truck & Equipment.

We minimize the disruptions at your facility and meet your schedule and budget. Our contractors and professionals assure you get the manpower you need for your project, and we use eco-friendly products and equipment to protect the environment. Our quality work and equipment is what makes us stand apart. We work with you to determine exactly what you need for your project. Every client has differing needs, and we customize our work to make your building or vehicle stand out. We can remove the paint through dustless blasting, and refinish the surface for an appealing look.

From painting to blasting, let Copag Truck & Equipment be your dedicated partner. Our quality services and cost-effective painting and blasting make us one of the most trusted companies in the area. We’ll handle all aspects of the job, finish quickly, and won’t consider a project complete until you’re entirely satisfied. Contact us today to see how we can help resurface any old, worn out, or rusted paint at your commercial property. Whether your tanks and pipes are carrying water, chemicals, storage, or other substances, our tank blasting ensures the surroundings are protected by reducing friction, heat, and dust.