Sandblasting Operation
Sand-Blasting is a surface preparation method mostly used in a number of different industries with a variety of project scopes. The various material types have different characteristics namely, hardness, shape...
READ MORE
Our Applications
Manufactured from the highest quality raw materials to bring you the CAM GRIT® with best performance in open nozzle blasting. The raw material availability is abundant from the local copper smelter, Sterlite Copper, India’s largest copper smelter. We have constantuninterrupted supply of raw materials to the factory with help of our company owned transport facility. We have on-site fork lifts and loaders to handle the Finished Goods.
-
Sandblasting SKILL - 100%
-
Corrosion Removing SKILL - 100%
-
Pipeline Blasting SKILL - 100%
-
Surface Preparation SKILL - 100%
-
Paints Removals SKILL - 100%
Sandblasting
Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle.
Quality
Application Range
1
LESS THAN FINE
0.1mm – 0.4mm
2
FINE
0.2mm – 0.85mm
3
MEDIUM
0.2mm – 1.40mm 0.2mm – 1.70mm
4
COARSE
0.5mm – 2.0mm
5
COARSE
0.2mm – 2.50mm
6
COARSE
0.5mm – 2.50mm
Corrosion Removing
Corrosion is a process that takes place when essential properties within a given material begin to deteriorate, after exposure to elements that recur within the environment.
Quality
Application Range
1
MEDIUM
0.2mm – 1.40mm
2
MEDIUM
0.2mm – 1.70mm
3
COARSE
0.5mm – 2.0mm
4
COARSE
0.2mm – 2.50mm
5
COARSE
0.5mm – 2.50mm
6
MARINE HEAVY
1.00mm – 3.00mm
Corrosion Removing
Both organic and metallic coatings are used to provide protection against corrosion of metallic substrates. 3M offers a total Pipeline Corrosion Protection Solution with a variety of functional pipe coatings ...
READ MORE
Pipeline Blasting
Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants. A pressurized fluid, typically air, or a centrifugal wheel is used to propel the blasting material.
Quality
Application Range
1
FINE
0.2mm – 0.85mm
2
MEDIUM
0.2mm – 1.40mm
3
MEDIUM
0.2mm – 1.70mm
Pipeline Blasting
Pipelines are a crucial component in the modern transportation of water, oil, gas, and other liquid chemical compounds. A fresh coat of paint can improve the looks of your pipes while allowing them to perform at full functionality...
READ MORE
Surface Preparation
Surface Preparation is a full line distributor of abrasives, replacement parts, equipment, and services for both industrial and commercial surface finishing needs.
Quality
Application Range
1
FINE
0.2mm – 0.85mm
2
FINE
0.5mm – 1.40mm
3
MEDIUM
0.2mm – 1.40mm 0.2mm – 1.70mm
Surface Preparation
Surface preparation is the essential first stage treatment of a steel substrate before the application of any coating, and is generally accepted as being the most important factor affecting the total success of a corrosion protection system...
READ MORE
Painting Removing
We offers paint stripping, coating removal and rust removal services to handle virtually any coating removal requirement, from industrial paint stripping and rust removal to dry ice blasting services.
Quality
Application Range
1
FINE
0.2mm – 0.85mm
2
MEDIUM
0.2mm – 1.40mm
3
MEDIUM
0.2mm – 1.70mm
PaintingRemovals
We offers paint stripping, coating removal and rust removal services to handle virtually any coating removal requirement, from industrial paint stripping and rust removal to dry ice blasting services. ...
READ MORE
Our Application Range
Grade |
Size Range |
Profile* |
Application |
|---|---|---|---|
1 |
0.1 – 0.4mm | Less than fine | Cleaning surfaces where low profile is required. Suitable for the restoration of classic cars and motor bikes |
2 |
0.2mm – 0.85mm | Fine | To provide a fine profile for low build paints, selective removal of coatings and wet blasting. Also suitable for small nozzle work and hand guns. |
3 |
0.2mm – 1.70mm | Medium | Specially graded to rapidly clean steelwork with a medium profile to suit the majority of industrial coatings. Suitable for ships hulls, tanks, storage vessel bridges and steel fabrications |
4 |
0.5mm – 2.0mm | Coarse | To provide coarser profile suitable for metal spray. |
5 |
0.2mm – 2.50mm | Coarse | Highly corroded steel. |
6 |
0.5mm – 2.50mm | Coarse | Removal of heavy scale. To provide very coarse profile. |
7 |
1.0mm – 3.00mm | Coarse | Removal of Marine heavy scale. To provide very coarse profile for marine heavy |